How To Make A Water Dispenser Working Model From Cardboard & Plastic Bottle | howtofunda
#waterdispenser #homemade #diy #howtomake #cardboard #howtofunda #sciencefair #scienceexhibition #sciencemodel #workingproject #workingmodel

Creating a simple water dispenser using a plastic bottle and cardboard can be a useful and eco-friendly solution for dispensing water.

Here's a step-by-step guide on how to make it:

Materials Needed:

Plastic bottle (empty and clean)
Cardboard or thick paper
Scissors or utility knife
Pen or marker
Ruler
Adhesive (glue or double-sided tape)
Water
Instructions:

Prepare the Plastic Bottle:

Ensure the plastic bottle is empty, clean, and free from any liquid or residue. Remove the label and cap from the bottle.

Create the Dispenser Spout:

Take the capless plastic bottle and make a small hole near the bottom of the bottle using a utility knife or scissors. The hole should be just large enough to allow a steady stream of water to flow out.

Cut the Cardboard:

Cut a rectangular piece of cardboard or thick paper. The size should be about 1.5 to 2 times the height of the plastic bottle and wide enough to wrap around the bottle with a slight overlap.
Shape the Cardboard:

Use a pen or marker to draw a semicircle on one end of the cardboard. Cut along the marked line to create a semi-circular shape. This will be the dispenser's base.

Attach the Cardboard Base:

Wrap the cardboard around the plastic bottle, aligning the edges. Use adhesive (glue or double-sided tape) to secure the overlapping ends and form a cylindrical shape around the bottle.

Create the Dispenser Stand:

Cut a small rectangle from the remaining cardboard. Fold it into a triangular shape to create a stable stand for the water dispenser.
Attach the Stand to the Dispenser:

Use adhesive to attach the triangular stand to the bottom of the dispenser, ensuring that it provides stability and support.

Fill the Dispenser with Water:

Fill the plastic bottle with water through the bottle's neck (top opening).

Using the Water Dispenser:

To dispense water, simply tilt the plastic bottle slightly, allowing the water to flow through the hole at the bottom. The cardboard base and stand will help keep the dispenser steady, and you can place a cup or container underneath the spout to catch the water.

This simple DIY water dispenser provides a convenient way to serve water and can be a great eco-friendly alternative to single-use plastic water bottles.
====================
Materials Used :
Color Papers : https://amzn.to/3ir1uDo
Threads :https://amzn.to/354qyrZ
Glue Gun : https://amzn.to/356h7bt
Glue Sticks : https://amzn.to/3pCAGlc
Scissor : https://amzn.to/2SpBgGz
Cutter : https://amzn.to/3vgTQyk
Fevicol :https://amzn.to/3zfNYse
Paint : https://amzn.to/3pIfBG6
Paint Brushes : https://amzn.to/2SonJPF
Robo DC Motor : https://amzn.to/3g7kN31
DC Motor : https://amzn.to/3zhrcQD
DC Water Pump - https://amzn.to/3izSE6e
Switch : https://amzn.to/3gmvNbM
=================================

Tripod :https://amzn.to/3xd29fS
Camera : https://amzn.to/3zgGFR3
Laptop : https://amzn.to/3x5i1AS
================================
Amazon - https://www.amazon.in/shop/howtofunda
Website - http://howtofunda.com
facebook - http://facebook.com/howtofunda
twitter - http://twitter.com/howtofunda
instagram - http://instagram.com/howtofunda