hydraulic lift (car) working model | science project | diy | howtofunda
#hydraulicliftworkingmodel #scienceproject #howtofunda #sciencefair #scienceexhibition #sciencemodel #workingproject #workingmodel #HydraulicLift #DIYScienceProject #PascalLaw #EngineeringModel #ScienceExhibition #PhysicsProject #STEM #WorkingModel #SchoolProject #Hydraulics #CarLift #HydraulicCarLift

Explanation:

How It Works:
The hydraulic system uses Pascal’s Law to lift the car with the force of water!
When you push one syringe, water moves through the tube, pushing the other syringe up!
This is the same principle used in real-life hydraulic car lifts, cranes, and heavy machinery!

In this working model, the syringes represent the hydraulic cylinders used in a hydraulic lift system. When the large syringes' plungers are pushed down, it forces the hydraulic fluid (air in this case) through the plastic tubing into the small syringe. The small syringe acts as the lifting piston, and as the fluid is compressed in the small syringe, it exerts an upward force on the plunger, lifting the car off the ground.

Creating a working model of a hydraulic car lift can be a fun and educational project.

Below is a simplified outline of how to build a basic hydraulic lift model that demonstrates the principles of hydraulics. Keep in mind that this model will be small-scale and may not be able to lift actual cars.

Materials Needed:

Syringes (two large and one small)
Plastic tubing (fits the syringe nozzles)
Wooden / cardboard board or sturdy base
Toy car or a small model car
Hot glue gun or adhesive


Instructions:

Set Up the Base:

Start by preparing the wooden base or sturdy platform. This will be the foundation for your hydraulic lift.

Assemble the Syringes:

Take the two large syringes and connect one end of the plastic tubing to the nozzles of each syringe.
Seal the connections with hot glue or adhesive to prevent leaks.


Position the Car and Blocks:

Place the toy car or model car on the wooden base to represent the car you want to lift.
Position the wooden blocks or similar objects under the car's wheels to elevate it slightly.
Create the Hydraulic System:

Attach the other ends of the plastic tubing to the small syringe.
Use hot glue or adhesive to secure the small syringe in a vertical position on the wooden base, with the plunger facing downward.
Hydraulic Lift Mechanism:

Hold the syringes upright and simultaneously push the plunger of the large syringes. As you push, the small syringe's plunger will be forced to move upward.
Observe the Lift:

As the small syringe's plunger moves up, it will raise the car off the ground, simulating a hydraulic lift mechanism.

amazon - https://www.amazon.in/shop/howtofunda
Website - http://howtofunda.com
facebook - http://facebook.com/howtofunda
twitter - http://twitter.com/howtofunda
instagram - http://instagram.com/howtofunda